2" Sanitary Nanofiltration Elements
- 2519 Element with ATD
Synder Filtrations's 2" sanitary nanofiltration elements are revolutionizing liquid separation with an unmatched combination of flux and rejection. With a pore size range of 150-500D, Synder's nanofiltration elements greatly reduce levels of hardness, nitrates, sulfates, tannins, turbidity, color, and TDS (including moderate levels of salt). Typically showing 30-50% greater flux than the industry standard, Synder's nanofiltration line is the ideal choice for the rejection of divalent and multivalent ions.
MEMBRANE ELEMENTS
| Membrane Model | Polymer | Approx. Molecular Weight Cutoff |
| NFX | Proprietary PA TFC | 150-300D |
| NFW | Proprietary PA TFC | 300-500D |
| Size | Membrane Area (sq. ft) |
Dimensions (OD, L, P.W.T ID, Weight) |
Recommended Cross Flow Rate |
| 1812 | 4 | 1.8", 12", 0.625", 1lb | 5 GPM (1.1 m3/h) |
| 2519 | 15 | 2.5", 19.25", 0.625", 3lb | 10 GPM (2.3 m3/h) |
| 2540 | 34 | 2.5", 40", 0.625", 4lb | 10 GPM (2.3 m3/h) |
*These specifications are for elements with our standard 31mil spacer. For complete product specifications for all models see our NF Sanitary Specification Sheet.
RECOMMENDED OPERATING PARAMETERS
| Parameter | Specification |
| Maximum Inlet Pressure | 600 PSI (41.37 Bar) if T<95ºF (35ºC) 435 PSI (29.99 Bar) if T>95ºF (35ºC) |
| Maximum Pressure Drop | Per Element: 15 PSI (1.03 Bar) Per Housing: 60 PSI (4.13 Bar) |
| Maximum Permeate Back Pressure | 5 PSI (0.3 Bar) |
| Maximum Operating/CIP Temperature | 122° F (50° C)/104° F (40° C) |
| pH Range (Operating @ 55°C/ CIP @ 50°C Max) |
NFX: 4-10/3-10.5 NFW: 3-9/2-10 |
| Chlorine Tolerance | 500ppm hours, dechlorination recommended |
| Maximum Feed Turbidity | 1-1.25 NTU |
| Maximum Feed SDI | NFX: 5-6 NFW: <5 |
*For expanded descriptions, please see our complete NF Specification Sheet.
This information is believed to be accurate and reliable, but is not to be construed as implying any warranty or guarantee of performance. We assume no responsibility, obligation or liability for results obtained or damages incurred through the application of the information contained herein. Refer to Standard Warranty documentation for additional information.
2" Industrial Nanofiltration Elements
- 2540F Element
Synder Filtrations's 2" industrial nanofiltration elements provide high quality liquid separation with incredible efficiency. Averaging 99.3% and 98% rejections of MgSO4 for the NFX and NFW membranes, respectively, these elements operate at significant lower pressures than reverse osmosis elements for applications that do not require a high salt rejection rate. Industrial elements are available in both a robust FRP wrap and a more economical tape wrap.
MEMBRANE ELEMENTS
| Membrane Model | Polymer | Approx. Molecular Weight Cutoff |
| NFX | Proprietary PA TFC | 150-300D |
| NFW | Proprietary PA TFC | 300-500D |
| Size | Membrane Area (sq. ft) |
Dimensions (OD, L, P.W.T OD, Weight) |
Tube Extensions Length (male model) |
Recommended Cross Flow Rate |
| 1812T | 3.20 | 1.8", 11.75", 0.675, 1lb | 1" (both ends) | 2-3 GPM (1.1 m3/h) |
| 2519HF | 13 | 2.5", 19.25", 0.62"(ID), 3lb |
N/A | 6 GPM (2.3 m3/h) |
| 2540HM | 27 | 2.5", 40", 0.75", 4lb | 1" (both ends) | 6 GPM (2.3 m3/h) |
*These specifications are for elements with our standard 31mil spacer. For complete product specifications for all models see our NFX and NFW Specification Sheets.
RECOMMENDED OPERATING PARAMETERS
| Parameter | Specification |
| Maximum Inlet Pressure | 600 PSI (41.37 Bar) if T<95ºF (35ºC) 435 PSI (29.99 Bar) if T>95ºF (35ºC) |
| Maximum Pressure Drop | Per Element: 15 PSI (1.03 Bar) Per Housing: 60 PSI (4.13 Bar) |
| Maximum Permeate Back Pressure | 5 PSI (0.3 Bar) |
| Maximum Operating/CIP Temperature | 122° F (50° C)/104° F (40° C) |
| pH Range (Operating @ 55°C/ CIP @ 50°C Max) |
NFX: 4-10/3-10.5 NFW: 3-9/2-10 |
| Chlorine Tolerance | 500ppm hours, dechlorination recommended |
| Maximum Feed Turbidity | 1-1.25 NTU |
| Maximum Feed SDI | NFX: 5-6 NFW: <5 |
*For expanded descriptions, please see our complete NFX or NFW Specification Sheet.
This information is believed to be accurate and reliable, but is not to be construed as implying any warranty or guarantee of performance. We assume no responsibility, obligation or liability for results obtained or damages incurred through the application of the information contained herein. Refer to Standard Warranty documentation for additional information.